Bàn tạo áp chuẩn dải cao LR-Cal LSP 7000-HP
Gọi / Zalo:  033 44 13586

Lượt xem: 5269 | Đánh giá:

Bàn tạo áp chuẩn dải cao LR-Cal LSP 7000-HP

Giá: Liên hệ

Hãng sản xuất:

Chi tiết

Thông tin sản phẩm

Comparison Test Pumps 

High pressure-spindle pump for calibration purposes

Model LR- Cal LSP 7000-HP

  • Pressure Source for calibration, hydraulic, pressure up to +7000 bar
  • Operating liquid: special high-pressure-suitable hydraulic liquid on mineral oil basis
  • With built-in booster pump
  • Also high pressures leave themselves generate via the spindle pressures without great expenditure of force and finely adjust, not a pressure converter or similar required
  • Execution in a sturdy metal housing

Description LR- Cal LSP 7000-HP Druckvergleichsprüfpumpe

  • The Pressure Comparison Test Pumps LR- Cal LSP 7000-HP used to generate pressure for testing, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements of all kinds. These pressure tests may be in the laboratory or workshop, but also on site to take place at the measuring point.
  • If you connect the pressure gauge to be tested and a sufficiently accurate reference pressure gauge to the Druckvergleichsprüfpumpe LR- Cal LSP 7000-HP on, acts upon actuation of the pump, the same pressure on both gauges. By comparing the two measured values ​​at any pressure values ​​can be a review of the accuracy or an adjustment of the instrument under test.
  • For the exact start of the measurement points, the Pressure Comparison Test Pumps (screw pumps) are LR- Cal LSP-HP 7000 equipped with a fine to be operated spindle wheel. The devices are characterized by a current within the pump body rotating spindle, so that there is no adverse bending torque on a spindle and particularly for mobile applications also has the advantage that the size of the Test Pumps not changed during operation by turning the spindle. The Pressure Comparison Test Pumps LR- Cal LSP 7000-HP only need a very little effort, you can also reach 7000 bar without pressure converter, so just by directly screwing the spindle.


Thông số kỹ thuật

Specification LR- Cal LSP 7000-HP Druckvergleichsprüfpumpe


Pressure range


0 .. 7000



Special oil for high pressures, see "Accessories"

Pressure connections


2 x M16x1, 5 outdoor thread, free rotating, changeable, with sealing cone

Liquid reservoir



Piston diameter





2.5 (about 0.08 per revolution)



at 250 bar: 1.5 
at 500 bar: 3.0 
at 1000 bar: 6.0 
bar at 3000: 18.0 
at 5000 bar: 30.0 
at 7000 bar: 42.0



Stainless steel, hardened stainless steel, PTFE

Distance between the pressure ports:





B 460 x D 445 x H 265 (without spindle cross)






Robust metal housing with adjustable feet

Article number




Tùy chọn phụ kiện

Accessories for LR- Cal LSP 7000-HP Druckvergleichsprüfpumpe


Product no.



Operating liquid, plastic bottle with 0.5 liters content


Threaded adapter, M16x1, 5 male thread with sealing cone, made ​​of hardened stainless steel 
(2 pieces thereof already included)


Adapter for connection column, M20x1, 5 outdoor thread with sealing cone, made of hardened stainless steel


Adapter for connection column, 7/16-18 UNF external thread with sealing cone, made of hardened stainless steel


Adapter for connection column, G 1/2 internal thread with O-ring, of stainless steel, max. Pressure 1600 bar!


Bình luận
Viết bình luận cho sản phẩm này:

Hãy bấm vào nút dưới đây để mở form bình luận:

Giới thiệu

Hoạt động kinh doanh của TESIN chủ yếu tập trung vào việc Cung cấp thiết bị của các hãng sản xuất do TESIN là đại diện ở Việt Nam, đồng thời... [Xem tiếp]


  024 6261 5111


Bản đồ

Đường đến TESIN

Văn phòng:

Tầng 9, #905 Tòa C6-K2, Mỹ Đình 1, Hà Nội