Máy dò khí đa năng GasAlertMicroClip XT
Gọi / Zalo:  033 44 13586

Lượt xem: 4431 | Đánh giá:

Máy dò khí đa năng GasAlertMicroClip XT

Giá: Liên hệ

Hãng sản xuất:

Chi tiết

Thông tin sản phẩm

GasAlertMicroClip XT with IntelliFlash

Features

  • Continuous LCD shows real-time gas concentrations
  • Compact and lightweight design makes it comfortable to wear
  • Water-resistant
  • Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
  • Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
  • Bright wide-angled visual alarm bars
  • Built-in concussion-proof boot

Additional Features:

  • IntelliFlash verifies operation and compliance to both the user and supervisor
  • Tamper-proof, one button operation
  • Compatible with the Sampler motorized remote sampling pump
  • Equipped with internal vibrating alarm for high noise areas
  • Powered by a lithium polymer battery
  • Multi-language support in English, French, German, Spanish and Portuguese
  • Conveniently manage your fleet using Fleet Manager II

Supported Gases:

  • H2S - hydrogen sulfide
  • CO - carbon monoxide
  • O2 - oxygen
  • LEL combustibles

Description

  • Multi-gas Made Easy
  • The GasAlertMicroClip XT provides affordable protection from atmospheric hazards. Its slim and compact design makes it easy to wear, allowing workers to focus on the job at hand without feeling weighed down. With easy one-button operation, workers make fewer operational errors and training time is reduced. The GasAlertMicroClip XT uses and easy-to-navigate interface common to previous generation gas monitors from BW technologies. This multi-gas monitor provides continuous visual confirmation of detector operation and compliance with the IntelliFlash™ feature. The GasAlertMicroClip XT is fully compatible with BW Technologies by Honeywell MicroDock II automatic test and calibration system.
  • Incredibly thin and lightweight, making it comfortable to wear
  • Multi-gas versatility with one-button simplicity
  • Continuous visual compliance with IntelliFlash
  • Extraordinarily low cost of ownership
  • Easy to test with MicroDock II compatibility
  • The slim and compact GasAlertMicroClip XT provides affordable protection from atmospheric hazards. This multi-gas detector provides continuous visual confirmation of detector operation and compliance with the IntelliFlash™ feature and the simple one-button operation offers ultimate ease of use and significantly reduces time spent training. The GasAlertMicroClip XT is fully compatible with BW’s MicroDock II automatic test and calibration system.
  • Choose any sensor combination for your GasAlertMicroClip XT multi-gas detector, which comes with a battery charger for your specific region. A variety of accessories and spares are available to compliment your detector and suit your application, such as confined space kits, carrying accessories, power options, docking station systems and sampling/testing equipment.
  • GasAlertMicroClip XT with IntelliFlash
  • One-button simplicity
  • Thin, lightweight and comfortable to wear

 

Tùy chọn mã sản phẩm

Models, Options, & Accessories

Model

Description

MC2-XWHM-Y-NA

GasAlertMicroClip XT Combustible (%LEL), oxygen (O2), hydrogen sulfide (H2S), carbon monoxide (CO) - yellow housing

MC2-XWHM-B-NA

GasAlertMicroClip XT Combustible (%LEL), oxygen (O2), hydrogen sulfide (H2S), carbon monoxide (CO) - black housing

MC-CK-DL

GasAlertMicroClip deluxe confined space kit

Model

Accessories

GA-PA-1-MC5

Multi-unit power adaptor For GasAlert Detectors

GA-PA-1-NA

Replacement power adaptor For GasAlert Series

GA-PA-3

12-24 VDC direct-wire power adaptor For GasAlert Detectors

GA-VPA-1

12-24 VDC vehicle power adaptor For GasAlert Detectors

MC-AF-1

Auxiliary filter adaptor (no filters) For GasAlertMicroClip Detectors

MC-AF-K1

Auxiliary filter kit (complete with filter adaptor and 5 filters) For GasAlertMicroClip Detectors

MC-AS01

Manual aspirator pump kit with probe (1 ft. / 0.3m) For GasAlert Detectors

MC-CK-CC

Carrying case for GasAlertMicroClip (with foam and lid insert from confined space kit)

SR-DUMM1

Dummy sensor for 3-pin O2 or 3-pin TwinTox locations For GasAlert Detectors

SR-H-MC

Replacement MICROceL hydrogen sulfide (H2S) sensor For GasAlert Detectors

SR-M-MC

Replacement MICROceL carbon monoxide (CO) sensor For GasAlert

SR-TOX-MC-DUM

Dummy sensor for toxic sensor locations For GasAlert

SR-W-MC-DUM

Dummy sensor for combustible sensor location For GasAlert

SR-W-MP75C

Replacement MICROpeL combustible (LEL) sensor For GasAlert Detectors

SR-X10-C1

Replacement oxygen sensor For GasAlertQuattro Detectors

MC-LCD-K1

Replacement LCD kit for GasAlertMicroClip

DOCK2-0-1P-00-G

GasAlertMicroClip XT docking module (charging with no power supply)

DOCK2-2-1C1P-00-G

GasAlertMicroClip XT MicroDock II automatic test and calibration systembase station and GasAlertMicroClip XT docking module with charging cable

DOCK2-2-1P-00-G

GasAlertMicroClip XT MicroDock II automatic test and calibration systembase station and GasAlertMicroClip XT docking module without charging cable

MC2-C01-MC5

GasAlertMicroClip XT Multi-unit (5) cradle charger

MC2-LC-1

Black leather PVC carrying holster

MC2-SS

GasAlertMicroClip XT Quad sensor screen filters (for GasAlertMicroClip XT models "MC2-"), kit of 2

MC2-BC1

Replacement back encl (yellow) for MCXT

MC2-BC1B

Replacement back encl (black) for MCXT

MC2-FC1B

Replacement front encl (black) for MCXT

MC-SS-AF-K1

Auxiliary filter replacement for adaptor, kit of 10 For GasAlertMicroClip Detectors

MC2-FC1

Replacement front encl (yellow) for MCXT

MC2-FPCB1

Replacement flex PCB for GasAlertMicroClip XT


 

Thông số kỹ thuật

Specifications

Gas

Measuring Range

Resolution

H2S

0-100 ppm

1 ppm

CO

0-500 ppm

1 ppm

O2

0-30.0%

0.1%

Combustible gases

0-100% LEL
0-5.0% v/v

1%
0.1%

General Specifications

Size

4.4 x 2.4 x 1.1 in. / 11.3 x 6.0 x 2.9 cm

Weight

6 oz. / 171 g

Temperature

-4 to +136°F / -20 to +58°C

Humidity

0% - 95% RH (non-condensing)

Alarms

Visual, vibrating, audible (95 dB)
Low, High, STEL, TWA, OL (over limit)

Tests

Audible/visual alarms on activation, sensors, battery and circuitry (continuous)

Typical battery life

10 hours (typical); recharges in less than 4 hours

User options

Confidence beep

Set STEL interval

Sensor on/off

Latching alarms

Safe display mode

Stealth mode

Calibration lock

Auto zero on start up

O2 auto calibration on start up

Set bump test interval

IntelliFlash interval

Combustible gas measurement (% LEL or % by volume methane)

User-settable calibration gas level

Force bump test when overdue

Force calibration when overdue

Low alarm acknowledge

Language choices (five)

Set custom start up message

Ratings

EMI/RFI: Complies with EMC Directive 2004/108/EC
IP 66/67

Certifications and approvals

Class I, Div. 1, Gr. A, B, C, D
American Bureau of Shipping
ATEX: II 1 G Ex ia IIC T4 Ga
IECEx: Ex ia IIC T4 Ga
European Conformity

Warranty

Full two-year warranty including all sensors

 

Cấu hình tiêu chuẩn

Includes

  • Standard Package Contents:
  • GasAlertMicroClip XT
  • Charger wall plug
  • Calibration cap and tubing
  • Manual, materials booklet and technical reference guide

Confined Space Kit includes:

  • Leather carrying case
  • IR connectivity kit
  • 0.5 LPM regulator
  • 3 ft./1 m calibration hose with quick connect
  • 10 ft./3 m sampling hose with quick connect
  • Sampling probe
  • Hard-sided carrying case with lid insert pockets and foam case insert

 

Bình luận
Viết bình luận cho sản phẩm này:

Hãy bấm vào nút dưới đây để mở form bình luận:

Giới thiệu

Hoạt động kinh doanh của TESIN chủ yếu tập trung vào việc Cung cấp thiết bị của các hãng sản xuất do TESIN là đại diện ở Việt Nam, đồng thời... [Xem tiếp]

 

  024 6261 5111
  info(a)tesin.com.vn
  h3llomrthao
  h3llomrthao

 

Bản đồ

Đường đến TESIN

Văn phòng:

Tầng 9, #905 Tòa C6-K2, Mỹ Đình 1, Hà Nội